Please select Into the mobile phone version | Continue to access the computer ver.
My Phantom rotates anticlockwise
866 3 2014-12-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
mike
Second Officer
Flight distance : 5623 ft
Australia
Offline

My Phantom 1 has had a period of inactivity,
when I went to start it at first could not get engine start, but a hook up to assistant and recalibrate sorted that out.

Now it rotates anticlockwise quite strongly on lift off even in GPS mode. I recalibrated the compass but it hasn't had any noticeable effect.
it's correctible (just) with almost full yaw stick left, but very difficult to control!

Any Ideas?

Cheers
Mike
2014-12-28
Use props
xswamix
lvl.1

United States
Offline

Re-calibrate Tx stix, your yaw stick is backwards!!
2014-12-28
Use props
jamesnns
lvl.4

United States
Offline

Do an advanced IMU calibration in the Naza Asst.....
2014-12-28
Use props
mike
Second Officer
Flight distance : 5623 ft
Australia
Offline

xswamix Posted at 2014-12-28 17:47
Re-calibrate Tx stix, your yaw stick is backwards!!

Nah not backwards at all. LoL I see why you said that now... it required full yaw stick right! My bad
The controls aren't reversed they are biased.
I did managed to fix it within a coupla hours of posting, it was still unusual though.
I did a TX calibration after which the assistant was showing the bias.
Rebooted the thing and bias disappeared and controls seemed normal in an indoor test
2014-12-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules