Draco95
lvl.1
Australia
Offline
|
DJI-Jamie Posted at 2017-1-25 15:19
The H3-3D and H4-3D are not considered HD gimbals, like the newer Z15s are. You can get a video feed, since you're connecting directly into your FPV system via HDMI or AV, but the A3 will not recognize the gimbal for tilt control. Older products becoming incompatible with newer systems is common as technology progresses, and unfortunately these two gimbals are not expected to become compatible in the future.
If you want to keep the A3, you would need to change out to a 3rd party gimbal, which can now be customized via the F-ports on the A3. Based on the information provided, you are using a SBus RC/receiver combo with your rig, correct?
Correct, I was using SBus, but I've now dismantled the A3 and re-installed the A2, everything is funtioning again. The only gain I got from the A3 was triple redundancy, and that alone wasn't worth all the set backs. |
|