Please select Into the mobile phone version | Continue to access the computer ver.
RTH question on a hover issue
348 2 2017-4-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
fansebe7d662
lvl.2
United States
Offline

I tested the Mavic for lost control signal by shutting off the controler it returned home but huver about 5 feet off a grass area where a took off I waited about 30 secons for it to land so i decided to turn the controler back on and force land it should I had waited a little longer is this normal or do I have issues.  HUGO
2017-4-13
Use props
Heaven
lvl.1
Flight distance : 841391 ft
Brazil
Offline

Probably the sensor below detected that the place was not suitable for landing. In that case he is hovering in the air waiting for another command.
2017-4-13
Use props
Jason Lane
Second Officer
Flight distance : 260144 ft
Philippines
Offline

It's not 100% clear, but Page 13 of the the manual v1.6 seems to indicate that in a Failsafe RTH (signal lost) it will hover at 2m above the Home Point until the user confirms or cancels the landing. Presumably if no command is received it will eventually land due to critically low battery.
2017-4-13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules