Friends,

How to use dji goggles with P4?
I tried using USB but the drone was limited to 30m due to new rule (no app).
I do not have HDMI connection.

Apparently this device is completely useless (am I right DJI?)

Thank you all for your help.

Goggles connects to Phantom via USB cable and HDMI if you have installed HDMI module in RC.
For the issue you mentioned, please connect aircraft to DJI Go4 for a while, then connect to Goggles, the restriction will disappear, please have a try.

DJI Mindy Posted at 2017-9-6 01:48
Goggles connects to Phantom via USB cable and HDMI if you have installed HDMI module in RC.
For the issue you mentioned, please connect aircraft to DJI Go4 for a while, then connect to Goggles, the restriction will disappear, please have a try.

I cannot even get the DGI Assistant 2 to load in the goggles! When I go to activate the goggles there is a cue that shows how to connect to the Inspire 2. Can you help me?

Please review this information in this link: http://www.dji.com/dji-goggles/info#downloads. You can see the information in the manual. As well, you want to make sure that download the Assistant Software 2 in this area: http://www.dji.com/dji-goggles/info#downloads

Is your USB cable working properly? Is the Assistant 2 software recognizing your aircraft?

Pipahjimmy Posted at 2017-9-11 07:16
I cannot even get the DGI Assistant 2 to load in the goggles! When I go to activate the goggles there is a cue that shows how to connect to the Inspire 2. Can you help me?

Here is the tutorial video of how to activate Goggles for your reference, hope it will be helpful.