DGBarar
Second Officer
United States
Offline
|
Siroliver Posted at 3-19 13:28
Hi!
I have the newest firmware on both - rs2: v01.05.00.20, and fujifilm: 3.01 - and have the same issue :/ You have to start it twice, to works once :/ I can't imagine, why is it hard to put the x-h2s into the rs2, if all the rs3s can handle x-h2s. The Rs2 wasn't cheap, don't leave all the owners alone! Please dji, make an upgrate! Your last was more than a year!
Hi Siroliver:
Thank you for writing.
X-H2S firmware 2.1 was the best. It did not require two selections of record to get the camera to record for more than a few moments--one selection was enough. Version 3.00 and 3.01 has broken this and now requires selecting record twice as did firmware version 2.0.
Be careful what you wish for on DJI upgrading the firmware so that it allows of the X-H2S on the RS2. In looking at DJI’s compatibility chart of the X-H2S with RS3 it does not do very much except start/stop record. At least with the RS2’s current firmware, from the Ronin App I can also adjust the X-H2S' shutter speed, aperture, an ISO through RavenEye.
Don |
|