Can I turn off the thermal camera. Some of my flights I do not want to record thermal.Thanks

Yep, you have the option to record both at same time or just the one visual or thermal.

Hi, An Aerial ViewPoint. Thank you for reaching out. As shown in the images below:

1. When planning M3T for route flight missions, you can choose a wide camera instead of an IR camera;
2. When manually controlling the aircraft, you can only check the visible camera photo save option in the camera settings.
Neither of the above methods will store IR camera photos.

What's the difference between "Current View" and "Visible"?

HoverScout Posted at 4-9 06:58
What's the difference between "Current View" and "Visible"?

Current view is what you are seeing on the RC controller (without the flight controls), and is lower visual resolution (eg 1920x1080).  It will record visual, IR and/or split screen, depending on what you are viewing on the RC controller.  Visible gives you the readout from whichever of the two visible cameras you have selected at their full resolution (eg 3840x2160), subject to the camera settings you choose.

Give it a go and then look at the various products on your computer to see the difference.

rstewartb Posted at 4-10 00:29
Current view is what you are seeing on the RC controller (without the flight controls), and is lower visual resolution (eg 1920x1080).  It will record visual, IR and/or split screen, depending on what you are viewing on the RC controller.  Visible gives you the readout from whichever of the two visible cameras you have selected at their full resolution (eg 3840x2160), subject to the camera settings you choose.

Give it a go and then look at the various products on your computer to see the difference.

Thanks for the explanation