Dear All

I successfully up grade the firmware of the aircraft , however for the remote control I have problem , I could not do it using the three ways of installation ( by  DJI GO APP , direct from USB, and via gimbal, any one can help me on that?

there was no update for the controller this time around.

I am having the same problem, if there was no update for it this time why does the app keep showing "update rc"

There could be an update if you did not install the previous firmware release. It will not hurt to attempt to update it.

---

www.PhantomHelp.com
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Phantom.
Phantoms in stock and ready to ship worldwide! (see availability)

eggheadeug Posted at 2015-9-7 09:38
I am having the same problem, if there was no update for it this time why does the app keep showing  ...

Check the latest update on your controller...if you had 1.3.20....you will not need update at this time.

eggheadeug Posted at 2015-9-7 19:38
I am having the same problem, if there was no update for it this time why does the app keep showing  ...

I was using old version of firmware for the RC (1.2.6) by this I 've got the message to update the firmware for RC, however  once I install 1.3.2 version on RC , I did not get the message to update the firmware of RC , but you can not download the picture directly from the aircraft to your device.

Sling Shot Posted at 2015-9-7 12:58
Check the latest update on your controller...if you had 1.3.20....you will not need update at this ...

My RC version is N/A

Okay I've figured everything out, thank you guys

eggheadeug Posted at 2015-9-7 10:47
Okay I've figured everything out, thank you guys

how did you figure it out? I'm running into the same problem. the last update i had on mine was the one back in may

eggheadeug Posted at 2015-9-7 10:47
Okay I've figured everything out, thank you guys

how did you figure it out? I'm running into the same problem. the last update i had on mine was the one back in may

Same, my RC is stuck on 1.1.9.  Can't get it to take the 1.4 update.

edmora619@aol.c Posted at 2015-9-7 14:31
how did you figure it out? I'm running into the same problem. the last update i had on mine was th ...

As people here suggested my RC was most likely v1.2.8
I simply updated the RC to 1.3.20
The aircraft itself is v1.4.0010 since there was no RC update in this last firmware

Hope that helps

eggheadeug Posted at 2015-9-7 12:01
As people here suggested my RC was most likely v1.2.8
I simply updated the RC to 1.3.20
The aircraf ...

for some reason its not working on the remote. but ill keep on keeping on. thanks

eggheadeug Posted at 2015-9-7 12:01
As people here suggested my RC was most likely v1.2.8
I simply updated the RC to 1.3.20
The aircraf ...

How can you tell wht ver# is on the RC?

EL SID Posted at 2015-9-8 05:05
How can you tell wht ver# is on the RC?

With RC on and connected to mobile device, DJI GO App/General Settings (To Left-Most Icon)/About (Down at bottom)...

I stumbled on to finding the version on my RC, but its actually 1.1.8, so I put 1.2.6, 1.3, and 1.4 on and it still acts as if I haven't plugged a thing in.  The txt on the original run of both the aircraft and controller with 1.4 said "same or older version detected.

sstrathe@tds.ne Posted at 2015-9-7 16:46
I stumbled on to finding the version on my RC, but its actually 1.1.8, so I put 1.2.6, 1.3, and 1.4  ...

Try re-linking radio to Aircraft under the controller Icon in DJI Go App.

sstrathe@tds.ne Posted at 2015-9-7 16:46
I stumbled on to finding the version on my RC, but its actually 1.1.8, so I put 1.2.6, 1.3, and 1.4  ...

Never mind.... guess you can only have 1 in the root directory at a time.  

Phantom Help Posted at 2015-9-7 09:53
There could be an update if you did not install the previous firmware release. It will not hurt to a ...

How do i check the version of fw on the controller?