I was setting up a Hyperlapse course lock and trying to get my shutter speed down to 2” (with ISO set to 100 manual) but I could only get the shutter to 2” with auto shutter on, in manual only 1/3 (SEE PHOTOS).

Why couldn’t I set the shutter to 2” manually?

Hi there. Thank you for reaching out. We may need to forward this to our relevant team for further clarification. We will keep you posted. Thank you for your patience.

Thank you!

Pmcdn2014 Posted at 3-29 20:02
Thank you!

You are most welcome. We will keep you posted once we receive an update. Thank you for your understanding.

What was your interval? Maybe you need to choose an interval mich longer than 2 seconds in order to be able to use 2 second shutter speed.

David653 Posted at 3-31 09:07
What was your interval? Maybe you need to choose an interval mich longer than 2 seconds in order to be able to use 2 second shutter speed.

I believe the interval was 3 seconds, as 2 seconds wasn’t available, if I recall.

David653 Posted at 3-31 09:07
What was your interval? Maybe you need to choose an interval mich longer than 2 seconds in order to be able to use 2 second shutter speed.

The part, the puzzles me is that when everything is set the same theoretically you should be able to Get to the same setting measurements whether it’s on Auto or Manuel. He just seems odd to me that in manual mode won’t slow the shutter down as much as Auto.

Thank you for patiently waiting. This is normal, first ISO, EV, and shutter speed are related. Second, the range of camera parameters that can be set in different modes is also different, feel free to use the product. Thank you for your understanding.