Hi to all co-phantomers. Has anyone upgraded to new version? Any known issues? Please share.
Thanks

I had one, when I went to record a video after starting it would stop recording after a few seconds on it's own. I talked to support and they said to go back to 1.4 then upgrade back to 1.5. It records ok now.

jag01usn Posted at 2015-11-26 04:18
I had one, when I went to record a video after starting it would stop recording after a few seconds  ...

No issues including test for POI & Waypoint functions

I had no major issues. I only had to reset my rth setting and altitude settings

I just did a test flight and found that when hovering in the one place, with 16 satellites visible, the aircraft was sitting up about 4 metres off the ground and was moving up and down by a metre or more. I moved to another position, and got the same thing, altitude hold is not as good as it was previously.

Hi ,
The new firmware enables the Phantom 3 Pro to record the 2.7k resolution video . And it optimized Waypoint feature . The 2.7k video recording is available in Android version DJI Go only .Support for IOS version is coming soon .The new version firmware can be downgraded to 1.4.10 or later only.

I guess I may need to wait for the next update, as this one wouldn't load for me.
Actually a local Phantom retailer already offered to help me, I will just have to pop in there and take care of this update tomorrow.

RedHotPoker

Flew through 2 batteries yesterday, following the update, all went well. I did have a loss of signal right near the end of my second flight, but, the Phantom was close to me,so, I am withholding judgement until next flight.

John  

Did you all update the App for the version 2.4.2 ?

GQ. Posted at 2015-11-26 07:06
Did you all update the App for the version 2.4.2 ?

yes, updated app and aircraft

Quadular Posted at 2015-11-26 08:16
yes, updated app and aircraft

Did you calibrate the IMU and the gimbal ?

GQ. Posted at 2015-11-26 07:22
Did you calibrate the IMU and the gimbal ?

Yes, always calibrate IMU and gimbal following an update. Compass dance on first flight.

Quadular Posted at 2015-11-26 08:28
Yes, always calibrate IMU and gimbal following an update. Compass dance on first flight.

Maybe it was interference because of a wifi network not far away or from the tablet you are using ?

GQ. Posted at 2015-11-26 07:50
Maybe it was interference because of a wifi network not far away or from the tablet you are using  ...

My thought's exactly, that is why I will wait and see

GQ, your last comment made me think.......my nephew was with me and flying the aircraft at the moment it lost signal, I had the wifi off on my I-pad mini2, but, my nephew had his I-phone in his pocket........makes me wonder if that may have caused the signal loss???? I never fly with my i-phone near me or the RC.

Quadular Posted at 2015-11-26 09:20
GQ, your last comment made me think.......my nephew was with me and flying the aircraft at the momen ...

Quadular you have your answer.You said it happen when the Phantom was closed to you.
Have fun.
GQ

I succed to update the controller with the app. But I can"t succeed to update the Phantom directly. I put .bin on the root of my SD like I always do, but nothing happen. I also did a format and re-put the .bin but still nothing happen.

Is someone experience the same issue ?

Thank you

Can anybody explain this "optimized Waypoint feature"?

Same here.... Controller updated but the actual drone isn't updating....