Hi all

I have had previous P4 but had problems but iam going to give it another shot can I ask for some help

What is the right sequence to turn on the aircraft and controller and app on

And what is the right sequence to do the firmware update is it the aircraft first then the controller or the controller than the aircraft

Thanks UK

Stick the batteries on charge, put your feet up and watch the videos relates to updating the P4.

Hi

I always do RC first then what ever model I'm flying that next, last i plug the cable into the device then open the app

Update the P4 first the the RC

Aardvark Posted at 2016-4-26 04:02
Stick the batteries on charge, put your feet up and watch the videos  THISrelates to updating the  ...

Tanks for your help

mark.mwilliams7 Posted at 2016-4-26 04:06
Hi

I always do RC first then what ever model I'm flying that next, last i plug the cable into the  ...

thanks for your help

mark.mwilliams7 Posted at 2016-4-26 04:06
Hi

I always do RC first then what ever model I'm flying that next, last i plug the cable into the  ...

Hi thanks for your help

Hello Chris, here are some tips:
If you want more tutorials of phantom 4, please click:https://www.youtube.com/playlist?list=PL8-vxWY64sBNqoF71lWL0ZCztUE9JaFK8

mark.mwilliams7 Posted at 2016-4-26 04:06
Hi

I always do RC first then what ever model I'm flying that next, last i plug the cable into the  ...

Hi thanks for your help

DJI-Paladin Posted at 2016-4-26 12:30
Hello Chris, here are some tips:
If you want more tutorials of phantom 4, please click:https://www.y ...

Hi Paladin

Thanks for your help

When doing the firmware update do you do the aircraft first and then the RC does it matter ?
i am using the DJI App

ChrisElly Posted at 2016-4-26 23:23
Hi Paladin

Thanks for your help

Normally I'm used to upgrade the drone first.But don't forget to calibrate the IMU and link the RC and drone again after upgrading