nebowe
lvl.1
Offline
|
phantom 3 professional issue is : after unit sitting for a couple months, first outage had no camera. tried to upgrade firmware to 1.8 version (lates) with epic fail. Here is the following data as best as i can show and dji repair has said send it down but unit is not worth the money to send it down to US due to the low canadian dollar. (i expect to have to pay for the repair). here are the details as best as i can determine.
First of all the history of the unit, it was purchased in Sept 2015 in Vancouver BC from a store that is now closed. there has been 3 VERY light crashes (this is no exaggeration as in literally kissed a bit of brush about 6 to 10 feet up and landed in brush or grass) each time the only damage was prop nicks which were replaced immediately and the unit flown after every crash with no problems. I put it away from roughly jan to around april or so and when I fired it back up it had no camera but it would fly including on GPS. So i put it back away for a few weeks and then recently i started to go about getting it in shape to operate with the nice weather. I took a look at the forums after doing the firmware upgrade method that i was used to with a failed result. I went throught re-formatting in the pc ...in the aircraft too as per suggestion with no luck. i have attempted downgrading the RC with no difference. calibrated the IMU with a laser transit shooting the level on a granite tool service with success (or so it said). All the wires from the gimbal to the aircraft appear intact under a magnifying lens. the connectors seem tight. The GO app is updated to the latest version. I attempted to back track and attempted the upgrade of the aircraft firmware. The file looks like it indicates fail but the version (below) shows on the app about screen as version 1.7.60+ I have re-attempted the upgrade to 1.8 again to no avail. Any help would be welcomed and even wild outside of the box thinking might be tried, i really have nothing to lose at this point. I am not going to bash dji as there is no point. Whatever has been done is my responsibility. OK...what does the group think:
APP = 2.8.0
Version 1.7.60+
Remote Controller 1.5.80
Flight Controller SN 03z0286442
Udated text file. (i find it odd that it almost seems like it has reset the clock to 2014 )
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
========== 2015.09.27 06:13:31 =====================
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
========== 2015.09.27 06:14:32 =====================
Packet: P3X_FW_V01.03.0020.bin
========== 2015.09.27 06:15:55 =====================
Packet: P3X_FW_V01.03.0020.bin
========== 2015.09.27 06:16:59 =====================
Packet: P3X_FW_V01.03.0020.bin
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:17 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2016.05.04 04:24:52 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2016.05.04 05:00:52 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:05:39 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
Hidden Log File ----my apologies for the length
[00012228][01 00] Firmware upgrade finished successfully.
[00012334]Done.
[00012363]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0xb0ce61ff].
[00012404]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012468]Version checking[2]...
[00012527][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012588][03 06][00] v2.1.6.18 -> v2.2.6.19 need upgrade.
[00012625][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012677][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012767][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00012838][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012893][12 01][00] v1.8.0.0 -> v1.8.0.0
[00012961][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013037][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013156][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013211][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00013358][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00013416][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013445][01 00][05] v1.23.3419 -> v1.23.3419
[00013477][01 01][00] v1.6.2736 -> v1.23.3419 need upgrade
[00013524][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013555]Done.
[00013590]Firmware upgrading[2]...
[00013725][01 01] Firmware upgrade start...
[00043984][01 01] Firmware upgrade finished successfully.
[00044846][08 00] Firmware upgrade start...
[00572370][08 00] Firmware upgrade finished successfully.
[00572426][17 00] Firmware upgrade start...
[00661027][17 00] Firmware upgrade finished successfully.
[00661076][17 01] Firmware upgrade start...
[00724210][17 01] Firmware upgrade finished successfully.
[00724259][11 00] Firmware upgrade start...
[00776685][11 00] Firmware upgrade finished successfully.
[00776903][03 06] Firmware upgrade start...
[01092385][03 06] Firmware upgrade finished successfully.
[01092445][04 00] Firmware upgrade start...
[01150503][04 00] Firmware upgrade finished successfully.
[01150537]Done.
[01150565]Version checking[3]...
[01150624][03 05][00] v34.2.0.9 -> v34.2.0.9
[01150704][03 06][05] v2.2.6.19 -> v2.2.6.19
[01150746][04 00][05] v1.40.0.0 -> v1.40.0.0
[01150899][09 00][00] v1.7.0.3 -> v1.7.0.3
[01151204][11 00][05] v1.7.0.0 -> v1.7.0.0
[01151314][12 00][00] v1.8.0.0 -> v1.8.0.0
[01151394][12 01][00] v1.8.0.0 -> v1.8.0.0
[01151493][12 02][00] v1.8.0.0 -> v1.8.0.0
[01151580][12 03][00] v1.8.0.0 -> v1.8.0.0
[01151719][15 00][00] v1.1.2.0 -> v1.1.2.0
[01151810][17 00][05] v1.1.1.7 -> v1.1.1.7
[01151943][17 01][05] v1.0.2.7 -> v1.0.2.7
[01151999][19 00][00] v1.0.8.96 -> v1.0.8.96
[01152029][01 00][05] v1.23.3419 -> v1.23.3419
[01152061][01 01][05] v1.23.3419 -> v1.23.3419
[01152109][08 00][05] v0.12.0.4 -> v0.12.0.4
[01152140]Packet upgrade finish successfully.
[00012584]========== remo-con disconnect. boot(15) ============
[00012627]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x28507261].
[00012661]Packet upgrade start...
[00012704]Packet checking...
[00012740]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012774]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012807]Done.
[00012845]Version checking[1]...
[00012921][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013001][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013046][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013096][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013201][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013276][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013341][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013416][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013495][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013630][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013690][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013811][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013856][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013891][01 00][00] v1.23.3419 -> v1.23.3419
[00013925][01 01][00] v1.23.3419 -> v1.23.3419
[00013974][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014008]Done.
[00016047]Waiting for user confirm...
[00026079]Timeout, start upgrade automatically.
[00026144]Firmware upgrading[1]...
[00026184][11 00] Firmware upgrade start...
[00075281][11 00] Firmware upgrade finished successfully.
[00075405]Done.
[00075444]Version checking[2]...
[00075509][03 05][00] v34.2.0.9 -> v34.2.0.9
[00075589][03 06][00] v2.2.6.19 -> v2.2.6.19
[00075630][04 00][00] v1.40.0.0 -> v1.40.0.0
[00075679][09 00][00] v1.7.0.3 -> v1.7.0.3
[00075789][11 00][05] v1.7.0.0 -> v1.7.0.0
[00075860][12 00][00] v1.8.0.0 -> v1.8.0.0
[00075949][12 01][00] v1.8.0.0 -> v1.8.0.0
[00076024][12 02][00] v1.8.0.0 -> v1.8.0.0
[00076104][12 03][00] v1.8.0.0 -> v1.8.0.0
[00076237][15 00][00] v1.1.2.0 -> v1.1.2.0
[00076314][17 00][00] v1.1.1.7 -> v1.1.1.7
[00076474][17 01][00] v1.0.2.7 -> v1.0.2.7
[00076519][19 00][00] v1.0.8.96 -> v1.0.8.96
[00076554][01 00][00] v1.23.3419 -> v1.23.3419
[00076601][01 01][00] v1.23.3419 -> v1.23.3419
[00076651][08 00][00] v0.12.0.4 -> v0.12.0.4
[00076685]Packet upgrade finish successfully.
[00012989]========== remo-con disconnect. boot(15) ============
[00013028]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x2511d070].
[00013059]Packet upgrade start...
[00013092]Packet checking...
[00013132]Packet vlink 01.04.0010 <-> 01.03.0020.
[00013176]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00013208]Done.
[00013238]Version checking[1]...
[00013296][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013356][03 06][00] v2.2.6.19 -> v2.3.0.13 need upgrade.
[00013394][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00013446][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013556][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013630][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013710][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013785][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013876][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00014011][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014086][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014207][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014267][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014298][01 00][00] v1.23.3419 -> v1.23.3419
[00014335][01 01][00] v1.23.3419 -> v1.23.3419
[00014378][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014482]Done.
[00016520]Waiting for user confirm...
[00026552]Timeout, start upgrade automatically.
[00026617]Firmware upgrading[1]...
[00026664][12 00] Firmware upgrade start...
[00091155][12 00] Firmware upgrade finished successfully.
[00091200][12 01] Firmware upgrade start...
[00157300][12 01] Firmware upgrade finished successfully.
[00157352][12 02] Firmware upgrade start...
[00221197][12 02] Firmware upgrade finished successfully.
[00221249][12 03] Firmware upgrade start...
[00286603][12 03] Firmware upgrade finished successfully.
[00286804][03 06] Firmware upgrade start...
[00605559][03 06] Firmware upgrade finished successfully.
[00605637][04 00] Firmware upgrade start...
[00664014][04 00] Firmware upgrade finished successfully.
[00664048]Done.
[00664080]Version checking[2]...
[00664133][03 05][00] v34.2.0.9 -> v34.2.0.9
[00664193][03 06][05] v2.3.0.13 -> v2.3.0.13
[00664240][04 00][05] v1.41.0.0 -> v1.41.0.0
[00664301][09 00][00] v1.7.0.3 -> v1.7.0.3
[00664453][11 00][00] v1.7.0.0 -> v1.7.0.0
[00664521][12 00][05] v1.10.0.0 -> v1.10.0.0
[00664606][12 01][05] v1.10.0.0 -> v1.10.0.0
[00664706][12 02][05] v1.10.0.0 -> v1.10.0.0
[00664786][12 03][05] v1.10.0.0 -> v1.10.0.0
[00664947][15 00][00] v1.1.2.0 -> v1.1.2.0
[00665021][17 00][00] v1.1.1.7 -> v1.1.1.7
[00665153][17 01][00] v1.0.2.7 -> v1.0.2.7
[00665201][19 00][00] v1.0.8.96 -> v1.0.8.96
[00665235][01 00][00] v1.23.3419 -> v1.23.3419
[00665268][01 01][00] v1.23.3419 -> v1.23.3419
[00665316][08 00][00] v0.12.0.4 -> v0.12.0.4
[00665348]Packet upgrade finish successfully.
[00012516]========== 2015.09.27 06:13:31. boot(0) ============
[00012549]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x28507261].
[00012582]Packet upgrade start...
[00012620]Packet checking...
[00012655]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012688]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00012721]Done.
[00012754]Version checking[1]...
[00012910][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012971][03 06][00] v2.3.0.13 -> v2.2.6.19 need upgrade.
[00013011][04 00][00] v1.41.0.0 -> v1.40.0.0 need upgrade.
[00013074][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013190][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013279][12 00][00] v1.10.0.0 -> v1.8.0.0
[00013364][12 01][00] v1.10.0.0 -> v1.8.0.0
[00013444][12 02][00] v1.10.0.0 -> v1.8.0.0
[00013519][12 03][00] v1.10.0.0 -> v1.8.0.0
[00014350][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014419][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014539][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014594][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014628][01 00][00] v1.23.3419 -> v1.23.3419
[00014663][01 01][00] v1.23.3419 -> v1.23.3419
[00014707][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014741]Done.
[00016775]Waiting for user confirm...
[00026809]Timeout, start upgrade automatically.
[00026879]Firmware upgrading[1]...
[00027044][03 06] Firmware upgrade start...
[00013020]========== 2015.09.27 06:14:32. boot(0) ============
[00013057]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x28507261].
[00013103]Packet upgrade start...
[00013147]Packet checking...
[00013185]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013220]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00013256]Done.
[00013297]Version checking[1]...
[00013371][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013432][03 06][00] v0.0.0.0 -> v2.2.6.19 need upgrade.
[00013479][04 00][00] v1.41.0.0 -> v1.40.0.0 need upgrade.
[00013524][09 00][00] v1.7.0.3 -> v1.7.0.3
[00026069][11 00][00] device not detected.
[00013006]========== 2015.09.27 06:15:55. boot(15) ============
[00013041]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x28507261].
[00013074]Packet upgrade start...
[00013113]Packet checking...
[00013149]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013183]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00013217]Done.
[00013252]Version checking[1]...
[00013308][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013374][03 06][00] v0.0.0.0 -> v2.2.6.19 need upgrade.
[00013487][04 00][00] v1.41.0.0 -> v1.40.0.0 need upgrade.
[00013538][09 00][00] v1.7.0.3 -> v1.7.0.3
[00026073][11 00][00] device not detected.
[00013042]========== 2015.09.27 06:16:59. boot(15) ============
[00013077]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x28507261].
[00013114]Packet upgrade start...
[00013159]Packet checking...
[00013198]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013249]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00013293]Done.
[00013328]Version checking[1]...
[00013400][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013480][03 06][00] v0.0.0.0 -> v2.2.6.19 need upgrade.
[00013529][04 00][00] v1.41.0.0 -> v1.40.0.0 need upgrade.
[00013590][09 00][00] v1.7.0.3 -> v1.7.0.3
[00026133][11 00][00] device not detected.
[00038673][12 00][00] device not detected.
[00051213][12 01][00] device not detected.
[00012789]========== remo-con disconnect. boot(15) ============
[00012828]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28507261].
[00012867]Packet upgrade start...
[00012906]Packet checking...
[00012944]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012986]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013023]Done.
[00013060]Version checking[1]...
[00013119][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013179][03 06][00] v0.0.0.0 -> v2.3.0.13 need upgrade.
[00013241][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013309][09 00][00] v1.7.0.3 -> v1.7.0.3
[00025845][11 00][00] device not detected.
[00038388][12 00][00] device not detected.
[00050929][12 01][00] device not detected.
[00063468][12 02][00] device not detected.
[00076004][12 03][00] device not detected.
[00076145][15 00][00] v1.1.2.0 -> v1.1.2.0
[00088688][17 00][00] device not detected.
[00101226][17 01][00] device not detected.
[00101294][19 00][00] v1.0.8.96 -> v1.0.8.96
[00101330][01 00][00] v1.23.3419 -> v1.23.3419
[00101367][01 01][00] v1.23.3419 -> v1.23.3419
[00101414][08 00][00] v0.12.0.4 -> v0.12.0.4
[00101545]Done.
[00103584]Waiting for user confirm...
[00113624]Timeout, start upgrade automatically.
[00113702]Firmware upgrading[1]...
[00113895][03 06] Firmware upgrade start...
[00435868][03 06] Firmware upgrade finished successfully.
[00435906]Done.
[00435943]Version checking[2]...
[00436004][03 05][00] v34.2.0.9 -> v34.2.0.9
[00436085][03 06][05] v2.3.0.13 -> v2.3.0.13
[00436129][04 00][00] v1.41.0.0 -> v1.41.0.0
[00436194][09 00][00] v1.7.0.3 -> v1.7.0.3
[00436324][11 00][00] v1.7.0.0 -> v1.7.0.0
[00436398][12 00][00] v1.10.0.0 -> v1.10.0.0
[00436478][12 01][00] v1.10.0.0 -> v1.10.0.0
[00436554][12 02][00] v1.10.0.0 -> v1.10.0.0
[00436638][12 03][00] v1.10.0.0 -> v1.10.0.0
[00436765][15 00][00] v1.1.2.0 -> v1.1.2.0
[00436853][17 00][00] v1.1.1.7 -> v1.1.1.7
[00436972][17 01][00] v1.0.2.7 -> v1.0.2.7
[00437034][19 00][00] v1.0.8.96 -> v1.0.8.96
[00437070][01 00][00] v1.23.3419 -> v1.23.3419
[00437106][01 01][00] v1.23.3419 -> v1.23.3419
[00437163][08 00][00] v0.12.0.4 -> v0.12.0.4
[00437202]Packet upgrade finish successfully.
[00014544]========== remo-con disconnect. boot(15) ============
[00014578]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2511d070].
[00014612]Packet upgrade start...
[00014649]Packet checking...
[00014690]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014726]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014758]Done.
[00014792]Version checking[1]...
[00014867][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014926][03 06][00] v2.3.0.13 -> v2.4.14.5 need upgrade.
[00014966][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00015063][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00015136][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015211][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015276][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015357][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027892][15 00][00] device not detected.
[00027971][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028081][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028217][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028254][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
[00028294][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00040837][08 00][00] device not detected.
[00040898][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00040939]Done.
[00042975]Waiting for user confirm...
[00053015]Timeout, start upgrade automatically.
[00053090]Firmware upgrading[1]...
[00064651][01 00] Firmware upgrade start...
[00014129][01 00] Firmware upgrade finished successfully.
[00014173]Done.
[00014209]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2511d070].
[00014248]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014286]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014338]Version checking[2]...
[00014406][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014466][03 06][00] v2.3.0.13 -> v2.4.14.5 need upgrade.
[00014513][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00014627][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00014723][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014801][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014876][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014967][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027508][15 00][00] device not detected.
[00027591][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027712][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027777][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027814][01 00][05] v1.30.5036 -> v1.30.5036
[00027854][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00040391][08 00][00] device not detected.
[00040440][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00040476]Done.
[00040510]Firmware upgrading[2]...
[00040653][01 01] Firmware upgrade start...
[00070916][01 01] Firmware upgrade finished successfully.
[00070961][11 00] Firmware upgrade start...
[00123065][11 00] Firmware upgrade finished successfully.
[00123300][03 06] Firmware upgrade start...
[00458040][03 06] Firmware upgrade finished successfully.
[00458102][09 00] Firmware upgrade start...
[00510000][09 00] Firmware upgrade finished successfully.
[00510162][04 00] Firmware upgrade start...
[00568758][04 00] Firmware upgrade finished successfully.
[00568799]Done.
[00568838]Version checking[3]...
[00568914][03 05][00] v34.2.0.9 -> v34.2.0.9
[00569011][03 06][05] v2.4.14.5 -> v2.4.14.5
[00569063][04 00][05] v1.44.0.0 -> v1.44.0.0
[00569190][11 00][05] v1.7.15.1 -> v1.7.15.1
[00569290][12 00][00] v1.10.0.0 -> v1.10.0.0
[00569379][12 01][00] v1.10.0.0 -> v1.10.0.0
[00569478][12 02][00] v1.10.0.0 -> v1.10.0.0
[00569559][12 03][00] v1.10.0.0 -> v1.10.0.0
[00582097][15 00][00] device not detected.
[00582221][17 00][00] v1.1.1.7 -> v1.1.1.7
[00582362][17 01][00] v1.0.2.7 -> v1.0.2.7
[00582409][19 00][00] v1.0.8.96 -> v1.0.8.96
[00582448][01 00][05] v1.30.5036 -> v1.30.5036
[00582492][01 01][05] v1.30.5036 -> v1.30.5036
[00595036][08 00][00] device not detected.
[00595091][09 00][05] v3.0.0.10 -> v3.0.0.10
[00595132]Packet upgrade failed at version checking.
[00012763]========== remo-con disconnect. boot(15) ============
[00012948]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2511d070].
[00012985]Packet upgrade start...
[00013044]Packet checking...
[00013088]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013126]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013164]Done.
[00013201]Version checking[1]...
[00013298][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013379][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013427][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013559][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00013647][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013747][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013847][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013948][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026487][15 00][00] device not detected.
[00026591][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026723][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026795][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026835][01 00][00] v1.30.5036 -> v1.30.5036
[00026872][01 01][00] v1.30.5036 -> v1.30.5036
[00039498][08 00][00] device not detected.
[00039554][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039593]Done.
[00041637]Waiting for user confirm...
[00051675]Timeout, start upgrade automatically.
[00051755]Firmware upgrading[1]...
[00051805][11 00] Firmware upgrade start...
[00101018][11 00] Firmware upgrade finished successfully.
[00101061]Done.
[00101099]Version checking[2]...
[00101183][03 05][00] v34.2.0.9 -> v34.2.0.9
[00101303][03 06][00] v2.4.14.5 -> v2.4.14.5
[00101353][04 00][00] v1.44.0.0 -> v1.44.0.0
[00101484][11 00][05] v1.7.15.1 -> v1.7.15.1
[00101599][12 00][00] v1.10.0.0 -> v1.10.0.0
[00101698][12 01][00] v1.10.0.0 -> v1.10.0.0
[00101797][12 02][00] v1.10.0.0 -> v1.10.0.0
[00101923][12 03][00] v1.10.0.0 -> v1.10.0.0
[00114463][15 00][00] device not detected.
[00114553][17 00][00] v1.1.1.7 -> v1.1.1.7
[00114668][17 01][00] v1.0.2.7 -> v1.0.2.7
[00114741][19 00][00] v1.0.8.96 -> v1.0.8.96
[00114779][01 00][00] v1.30.5036 -> v1.30.5036
[00114818][01 01][00] v1.30.5036 -> v1.30.5036
[00127361][08 00][00] device not detected.
[00127420][09 00][00] v3.0.0.10 -> v3.0.0.10
[00127460]Packet upgrade failed at version checking.
[00012534]========== remo-con disconnect. boot(15) ============
[00012571]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2511d070].
[00012617]Packet upgrade start...
[00012660]Packet checking...
[00012701]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012738]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012787]Done.
[00012825]Version checking[1]...
[00012913][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012991][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013047][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013171][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013270][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013370][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013458][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013551][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026093][15 00][00] device not detected.
[00026180][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026428][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026491][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026531][01 00][00] v1.30.5036 -> v1.30.5036
[00026569][01 01][00] v1.30.5036 -> v1.30.5036
[00039113][08 00][00] device not detected.
[00039171][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039210]Packet upgrade failed at version checking.
[00013467]========== remo-con disconnect. boot(15) ============
[00013642]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2511d070].
[00013682]Packet upgrade start...
[00013731]Packet checking...
[00013772]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013814]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013855]Done.
[00013900]Version checking[1]...
[00013969][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014049][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014095][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014214][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014299][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014394][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014478][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014569][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027107][15 00][00] device not detected.
[00027198][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027338][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027398][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027439][01 00][00] v1.30.5036 -> v1.30.5036
[00027479][01 01][00] v1.30.5036 -> v1.30.5036
[00040018][08 00][00] device not detected.
[00040102][09 00][00] v3.0.0.10 -> v3.0.0.10
[00040141]Packet upgrade failed at version checking.
[00013235]========== remo-con disconnect. boot(15) ============
[00013279]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2511d070].
[00013318]Packet upgrade start...
[00013359]Packet checking...
[00013399]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013446]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013485]Done.
[00013522]Version checking[1]...
[00013593][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013678][03 06][00] v2.4.14.5 -> v2.4.13.0
[00013809][04 00][00] v1.44.0.0 -> v1.41.0.0
[00013918][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014033][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014114][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014219][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014302][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026854][15 00][00] device not detected.
[00026943][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027063][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027129][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027169][01 00][00] v1.30.5036 -> v1.29.4920
[00027212][01 01][00] v1.30.5036 -> v1.29.4920
[00039762][08 00][00] device not detected.
[00039828][09 00][00] v3.0.0.10 -> v2.13.0.0
[00039869]Packet upgrade failed at version checking.
[00012719]========== remo-con disconnect. boot(15) ============
[00012765]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x6b304633].
[00012810]Packet upgrade start...
[00012859]Packet checking...
[00012901]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012940]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012988]Done.
[00013033]Version checking[1]...
[00013101][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013176][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013226][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013340][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013438][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013525][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013615][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013705][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026248][15 00][00] device not detected.
[00026330][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026445][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026509][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026550][01 00][00] v1.30.5036 -> v1.30.5036
[00026588][01 01][00] v1.30.5036 -> v1.30.5036
[00039130][08 00][00] device not detected.
[00039186][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039228]Packet upgrade failed at version checking.
[00016597]========== remo-con disconnect. boot(15) ============
[00016640]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x6b304633].
[00016780]Packet upgrade start...
[00016826]Packet checking...
[00016877]Packet vlink 01.08.0080 <-> 01.07.0060.
[00016918]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00016962]Done.
[00017011]Version checking[1]...
[00017091][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017178][03 06][00] v2.4.14.5 -> v2.4.14.5
[00017226][04 00][00] v1.44.0.0 -> v1.44.0.0
[00017331][11 00][00] v1.7.15.1 -> v1.7.15.1
[00017422][12 00][00] v1.10.0.0 -> v1.10.0.0
[00017500][12 01][00] v1.10.0.0 -> v1.10.0.0
[00017599][12 02][00] v1.10.0.0 -> v1.10.0.0
[00017680][12 03][00] v1.10.0.0 -> v1.10.0.0
[00030221][15 00][00] device not detected.
[00030300][17 00][00] v1.1.1.7 -> v1.1.1.7
[00030445][17 01][00] v1.0.2.7 -> v1.0.2.7
[00030500][19 00][00] v1.0.8.96 -> v1.0.8.96
[00030549][01 00][00] v1.30.5036 -> v1.30.5036
[00030594][01 01][00] v1.30.5036 -> v1.30.5036
[00043135][08 00][00] device not detected.
[00043204][09 00][00] v3.0.0.10 -> v3.0.0.10
[00043246]Packet upgrade failed at version checking.
[00014709]========== 2016.05.04 04:24:52. boot(15) ============
[00014754]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x6b304633].
[00014797]Packet upgrade start...
[00014842]Packet checking...
[00014894]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014939]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014982]Done.
[00015031]Version checking[1]...
[00015094][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015198][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015250][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015374][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015455][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015533][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015641][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015723][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028273][15 00][00] device not detected.
[00028362][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028483][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028544][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028587][01 00][00] v1.30.5036 -> v1.30.5036
[00028630][01 01][00] v1.30.5036 -> v1.30.5036
[00041258][08 00][00] device not detected.
[00041323][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041368]Packet upgrade failed at version checking.
[00014586]========== 2016.05.04 05:00:52. boot(15) ============
[00014626]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x6b304633].
[00014667]Packet upgrade start...
[00014709]Packet checking...
[00014754]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014794]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014834]Done.
[00014874]Version checking[1]...
[00014958][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015037][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015083][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015223][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015302][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015408][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015482][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015586][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028127][15 00][00] device not detected.
[00028224][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028348][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028401][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028442][01 00][00] v1.30.5036 -> v1.30.5036
[00028482][01 01][00] v1.30.5036 -> v1.30.5036
[00041024][08 00][00] device not detected.
[00041087][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041129]Packet upgrade failed at version checking.
[00012630]========== remo-con disconnect. boot(15) ============
[00012670]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x6b304633].
[00012720]Packet upgrade start...
[00012769]Packet checking...
[00012813]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012862]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012903]Done.
[00012948]Version checking[1]...
[00013028][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013109][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013170][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013288][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013397][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013489][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013656][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013736][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026280][15 00][00] device not detected.
[00026392][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026512][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026597][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026645][01 00][00] v1.30.5036 -> v1.30.5036
[00026686][01 01][00] v1.30.5036 -> v1.30.5036
[00039239][08 00][00] device not detected.
[00039298][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039347]Packet upgrade failed at version checking.
[00012682]========== remo-con disconnect. boot(15) ============
[00012731]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x6b304633].
[00012775]Packet upgrade start...
[00012821]Packet checking...
[00012873]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012915]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012962]Done.
[00013012]Version checking[1]...
[00013093][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013172][03 06][00] v2.4.14.5 -> v2.4.13.0
[00013220][04 00][00] v1.44.0.0 -> v1.41.0.0
[00013352][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013441][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013532][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013621][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013727][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026272][15 00][00] device not detected.
[00026362][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026492][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026578][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026622][01 00][00] v1.30.5036 -> v1.29.4920
[00026667][01 01][00] v1.30.5036 -> v1.29.4920
[00039221][08 00][00] device not detected.
[00039297][09 00][00] v3.0.0.10 -> v2.13.0.0
[00039343]Packet upgrade failed at version checking.
[00338784]========== remo-con disconnect. boot(15) ============
[00338829]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2511d070].
[00338876]Packet upgrade start...
[00338923]Packet checking...
[00338971]Packet vlink 01.07.0060 <-> 01.06.0040.
[00339023]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00339168]Done.
[00339214]Version checking[1]...
[00339304][03 05][00] v34.2.0.9 -> v34.2.0.9
[00339403][03 06][00] v2.4.14.5 -> v2.4.13.0
[00339458][04 00][00] v1.44.0.0 -> v1.41.0.0
[00339584][11 00][00] v1.7.15.1 -> v1.7.15.1
[00339684][12 00][00] v1.10.0.0 -> v1.10.0.0
[00339791][12 01][00] v1.10.0.0 -> v1.10.0.0
[00339896][12 02][00] v1.10.0.0 -> v1.10.0.0
[00339996][12 03][00] v1.10.0.0 -> v1.10.0.0
[00352544][15 00][00] device not detected.
[00352651][17 00][00] v1.1.1.7 -> v1.1.1.7
[00352788][17 01][00] v1.0.2.7 -> v1.0.2.7
[00352863][19 00][00] v1.0.8.96 -> v1.0.8.96
[00352905][01 00][00] v1.30.5036 -> v1.29.4920
[00352955][01 01][00] v1.30.5036 -> v1.29.4920
[00365505][08 00][00] device not detected.
[00365583][09 00][00] v3.0.0.10 -> v2.13.0.0
[00365628]Packet upgrade failed at version checking.
[00013139]========== remo-con disconnect. boot(15) ============
[00013187]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2511d070].
[00013236]Packet upgrade start...
[00013286]Packet checking...
[00013338]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013383]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013430]Done.
[00013477]Version checking[1]...
[00013556][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013641][03 06][00] v2.4.14.5 -> v2.4.13.0
[00013695][04 00][00] v1.44.0.0 -> v1.41.0.0
[00013816][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013940][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014025][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014115][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014207][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026752][15 00][00] device not detected.
[00026851][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026971][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027047][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027091][01 00][00] v1.30.5036 -> v1.29.4920
[00027136][01 01][00] v1.30.5036 -> v1.29.4920
[00039697][08 00][00] device not detected.
[00039766][09 00][00] v3.0.0.10 -> v2.13.0.0
[00039810]Packet upgrade failed at version checking.
[00014720]========== remo-con disconnect. boot(15) ============
[00014773]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2511d070].
[00014822]Packet upgrade start...
[00014882]Packet checking...
[00014935]Packet vlink 01.07.0060 <-> 01.06.0040.
[00014983]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015039]Done.
[00015085]Version checking[1]...
[00015186][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015291][03 06][00] v2.4.14.5 -> v2.4.13.0
[00015358][04 00][00] v1.44.0.0 -> v1.41.0.0
[00015487][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015607][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015719][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015851][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015956][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028510][15 00][00] device not detected.
[00028615][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028754][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028826][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028883][01 00][00] v1.30.5036 -> v1.29.4920
[00028933][01 01][00] v1.30.5036 -> v1.29.4920
[00041490][08 00][00] device not detected.
[00041567][09 00][00] v3.0.0.10 -> v2.13.0.0
[00041616]Packet upgrade failed at version checking.
[00015396]========== remo-con disconnect. boot(15) ============
[00015447]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x2511d070].
[00015490]Packet upgrade start...
[00015547]Packet checking...
[00015591]Packet vlink 01.03.0020 <-> 01.01.0009.
[00015643]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00015690]Done.
[00015744]Version checking[1]...
[00015827][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015902][03 06][00] v2.4.14.5 -> v2.2.6.19
[00015957][04 00][00] v1.44.0.0 -> v1.40.0.0
[00016031][09 00][00] v3.0.0.10 -> v1.7.0.3
[00016162][11 00][00] v1.7.15.1 -> v1.7.0.0
[00016255][12 00][00] v1.10.0.0 -> v1.8.0.0
[00016335][12 01][00] v1.10.0.0 -> v1.8.0.0
[00016435][12 02][00] v1.10.0.0 -> v1.8.0.0
[00016515][12 03][00] v1.10.0.0 -> v1.8.0.0
[00029063][15 00][00] device not detected.
[00029254][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029381][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029471][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029521][01 00][00] v1.30.5036 -> v1.23.3419 need upgrade
[00029574][01 01][00] v1.30.5036 -> v1.23.3419 need upgrade
[00042127][08 00][00] device not detected.
[00042173]Done.
[00044217]Waiting for user confirm...
[00054273]Timeout, start upgrade automatically.
[00054364]Firmware upgrading[1]...
[00054537][01 01] Firmware upgrade start...
[00084833][01 01] Firmware upgrade finished successfully.
[00084883]Done.
[00084927]Version checking[2]...
[00085010][03 05][00] v34.2.0.9 -> v34.2.0.9
[00085130][03 06][00] v2.4.14.5 -> v2.2.6.19
[00085187][04 00][00] v1.44.0.0 -> v1.40.0.0
[00085254][09 00][00] v3.0.0.10 -> v1.7.0.3
[00085390][11 00][00] v1.7.15.1 -> v1.7.0.0
[00085494][12 00][00] v1.10.0.0 -> v1.8.0.0
[00085594][12 01][00] v1.10.0.0 -> v1.8.0.0
[00085699][12 02][00] v1.10.0.0 -> v1.8.0.0
[00085798][12 03][00] v1.10.0.0 -> v1.8.0.0
[00098350][15 00][00] device not detected.
[00098435][17 00][00] v1.1.1.7 -> v1.1.1.7
[00098576][17 01][00] v1.0.2.7 -> v1.0.2.7
[00098656][19 00][00] v1.0.8.96 -> v1.0.8.96
[00098703][01 00][00] v1.30.5036 -> v1.23.3419 need upgrade
[00098751][01 01][05] v1.23.3419 -> v1.23.3419
[00111307][08 00][00] device not detected.
[00111353]Packet upgrade failed at version checking.
[00013262]========== remo-con disconnect. boot(15) ============
[00013310]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x2511d070].
[00013360]Packet upgrade start...
[00013410]Packet checking...
[00013458]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013513]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 1).
[00013559]Done.
[00013608]Version checking[1]...
[00013684][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013764][03 06][00] v2.4.14.5 -> v2.2.6.19
[00013817][04 00][00] v1.44.0.0 -> v1.40.0.0
[00013900][09 00][00] v3.0.0.10 -> v1.7.0.3
[00014029][11 00][00] v1.7.15.1 -> v1.7.0.0
[00014204][12 00][00] v1.10.0.0 -> v1.8.0.0
[00014313][12 01][00] v1.10.0.0 -> v1.8.0.0
[00014393][12 02][00] v1.10.0.0 -> v1.8.0.0
[00014493][12 03][00] v1.10.0.0 -> v1.8.0.0
[00027049][15 00][00] device not detected.
[00027154][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027274][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027340][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027396][01 00][00] v1.30.5036 -> v1.23.3419 need upgrade
[00027445][01 01][00] v1.23.3419 -> v1.23.3419
[00039993][08 00][00] device not detected.
[00040049]Packet upgrade failed at version checking.
Anyway...i am at a loss and pretty sure it is junk but before i toss this entire package i am hoping someone catches something i have missed. I figure the repair is going to be around the 800 dollar mark with no warrranty coverage with it and i would be likely better going with a different drone. I appreciate any help
Thanks ED
|
|