Dear DJI,
It's been echoed many times on threads but I want to say it again.

Please release an upgraded pro osmo handle.

- give us rosette mounts on both sides and with more clearance or spacers for mounting  the DJI focus etc,
- USB out so we can monitor with a cable on our devices like the inspire series (focus peaking, et all)
- larger capacity battery in the new handle
- tripod screw hole in the bottom of the handle (reinforce the handle to support the weight)
- better joystick

I don't care if it's longer / heavier / bulkier or thicker in diameter.

Thanks

- audio out for headphone monitoring audio

Thank you for your feedback. I've relayed them to our R&D team. Thank you.

Yes we need a pro Osmo handle for the X5! The current Osmo handle is designed for the X3 and in many ways is not suitable for X5. Main problem is the wifi feed is not good enough quality to enable accurate focus, so OsmoX5 handle needs USB connection to give high quality feed for focus peaking/focus zoom.
Also should be a bigger handle, better balance with mount points on both sides.

Also NEED a base that works with the remote focus attached. And PLEASE PLEASE PLEASE get the remote focus to work properly with exposure set to manual!

- Firstly a larger battery or even an adapter for the inspire batteries so you can USB power output too to charge the iphone etc.
- Also HDMI out? I would like to be able to use a large 7" or bigger LCD screen & then use the iphone just to control settings
- A 2nd wireless output for iphone or a box with HDMI out too.

The ideal setup would be you build in lightbridge so we can also use the inspire controllers with the X5 & have HDMI out & USB feed into our phones.

dopeytree Posted at 2016-7-25 11:49
- Firstly a larger battery or even an adapter for the inspire batteries so you can USB power output  ...

And a z-axis that works with the x5r.

I second everything everyone said in here!!! PLEASE!

An updated camera X6, does near a7s mk2 low light capability. APSC size sensor, 50p in 4K, 14 stops dynamic range. Light weight gimbal design. Plus all of the above!

Plus and external power source connection on handle.