Is there a list of cellphones that will fit into the cell phone bracket? I have a Motorola Nexus 6 and would like to kow if it fits.


Thanks.

No but the dimensions are listed.....2.31-3.34 inch (58.6-84.8 mm)

Hi, I measured mine, with your phone's size in mind, it seems it's somewhere borderline. I suggest you wait a bit until someone who also has Nexus 6 tried it out.

I have Nexus 6 and 6p. Will test and report back

I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is too late for me until I found out that iPhone 6S Plus wont fit the provided holder. Until now, still waiting for a holder from DJI or maybe from any third party providers.

nth_gg Posted at 2016-9-6 06:41
I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is t ...

Are you talking about the Osmo Mobile? I thought the iPhone 6S Plus did fit?

nth_gg Posted at 2016-9-6 13:41
I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is t ...

It does fit. Only phones over 5.9 inches screen run the risk of not fitting, that means overhwelming majority of smart phones in the markets are fine in terms of size.

nth_gg Posted at 2016-9-5 22:41
I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is t ...

Umm what? Where did you hear the iPhone 6s Plus won't fit the Osmo Mobile? I don't see why DJI would neglect to include the most popular mobile device on the planet to be compatible with their line of products. The measurements are under the specs and it does appear the 6s Plus will fit with enough room for even a thin case.

I think most people have a case on their smartphones, I wonder why DIJ didn't factor that in designing the holder? This makes the "spare of the moment" shot difficult.  

nth_gg Posted at 2016-9-6 13:41
I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is t ...

DJI lists the specs of the cradle mount. It's up to you to look at the specs and see then your phone's specs to see if it will fit.
DJI would have to look at every single phone made in order to get that list. It's very easy to look at the Osmo Mobile page and see if your phone fits.

Maxi3D Posted at 2016-9-7 21:35
I think most people have a case on their smartphones, I wonder why DIJ didn't factor that in designi ...

The channel of the cradle is not adjustable. people have thin cases and thick cases. DJI made the cradle channel to work with just your phone or if you have one of those paper thin cases.

nth_gg Posted at 2016-9-6 13:41
I agree with the idea that DJI should publish a list of supported mobile phones. In my case, it is t ...

It fits but don't bother buying it to use with the iPhone 6 plus. Video footage looks awful because of the conflict of the iPhone's image stabilization.

godlessglen@gma Posted at 2016-9-9 13:01
It fits but don't bother buying it to use with the iPhone 6 plus. Video footage looks awful becaus ...

I have not tried a 6s+ yet, also good walking technique is required.

Works very well with my iphone 6, however it won't work with the Apple silicone case attached. It fits ok, but the Osmo doesn't recognise that there is a phone there for some reason.

jamesburchell Posted at 2016-9-10 03:40
Works very well with my iphone 6, however it won't work with the Apple silicone case attached. It fi ...

If you place a piece of tape over the sensor it may work.
BUT, if with your case on and when powered off if it pitches forward quickly then the balance will be off too much and you could damage the tilt motor.

It DOES NOT fit. The Nexus 6 DOES NOT FIT.

axelcureno Posted at 2016-9-28 09:15
It DOES NOT fit. The Nexus 6 DOES NOT FIT.

Sorry to hear that. Thanks for your heads up