2016.12.06 v01.03.0000
What's New?

•  Added AR route display in TapFly mode when used with the DJI GO 4 app.
•  Added a vibration warning for the remote controller when the aircraft enters ATTI mode. 
• Added wind speed evaluation and a high wind speed warning.
•  Added more film looks and color modes (when used with the DJI GO 4 app).
  

Improvements:

•  Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode.
•  Improved magnetic detection for the remote controller. The aircraft will now return to home when
  strong magnetic interference is detected.
•  Improved the speed at which the HD video link connection can be regained after disruption.
•  Optimized altitude maintenance capabilities when flying over water.
•  Optimized Gesture Mode.
•  Improved the indoor flying experience by shortening the minimum distance from an obstacle from 3m to 1m.
•  Optimized power management for long-term battery storage.
  

https://dl.djicdn.com/downloads/mavic/Mavic+Pro+Release_Notes_en_201612.pdf

I love how quickly  these features get improved and optimized.  Bravo!

Looks like some good improvements. I wonder if the magnetic RTH will reduce the strange flight behavior that some have reported.

I am on the Android Go 4 app and on 1.02.0810 and it is not offering me a firmware update. Any steps i should take to update?

fans724e4845 Posted at 2016-12-6 10:57
I am on the Android Go 4 app and on 1.02.0810 and it is not offering me a firmware update. Any steps i should take to update?

Try using a computer and the Assistant 2 software.

Jerry

fans724e4845 Posted at 2016-12-7 00:57
I am on the Android Go 4 app and on 1.02.0810 and it is not offering me a firmware update. Any steps i should take to update?

I updated using DJI Assistant 2.

"Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode."
That's big news.   So many folks have been reporting compass errors leading to unexpected ATTI mode.

"Optimized power management for long-term battery storage."
The battery's firmware updates too?

MyFirstDrone Posted at 2016-12-6 11:10
"Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode."
That's big news.   So many folks have been reporting compass errors leading to unexpected ATTI mode.

YES! This is what I've been waiting for.

SWeeeeeet.

JtrJr-UAV Pilot Posted at 2016-12-6 12:01
Try using a computer and the Assistant 2 software.

Jerry

I was also able to use the Assistant 2 software, thanks guys

I've been using a free lut that uses art mode and -3 -1 -1. Anyone else noticed art has gone and know if any of the film settings are the same?

Great updates! Cant wait to fly!

Still no mute for the return to home BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP

I would wait on this one because of the wind warning has made some peoples phantom 4 pro unusable

Seems like a substantial update .. hopefully fixes the GPS/ATTI mode issue i had the other day.

Looks like Manual also has been updated today (2016-12-06) to version 1.2:

http://www.dji.com/mavic/info#downloads
https://dl.djicdn.com/downloads/ ... ser+Manual+V1.2.pdf

I can quickly see it refers to the new DJI Go 4 app. I have no idea if there's any other changes but that.

dana5 Posted at 2016-12-7 02:50
Still no mute for the return to home BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP

This and the low batt beeping are both critical updates for me. They are ruining my live streams.

StigNygaard Posted at 2016-12-7 03:26
Looks like Manual also has been updated today (2016-12-06) to version 1.2:

http://www.dji.com/mavic/info#downloads

And they actually updated the version number this time!!!

dana5 Posted at 2016-12-6 12:50
Still no mute for the return to home BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP

Yes, just an overall volume adjustment for the TX would be great

Ledg Posted at 2016-12-6 11:42
I've been using a free lut that uses art mode and -3 -1 -1. Anyone else noticed art has gone and know if any of the film settings are the same?

That's not good, I've been using the Art setting also and it is recommended by a number of people also. Why would they do away with it??

I updated from my phone and the DJI GO 4 app.  Successful.

Which calibrations should be done after this update? IMU? Sticks? Sensors?

fansebeed138 Posted at 2016-12-6 20:09
I updated from my phone and the DJI GO 4 app.  Successful.

Yep same no problems.

T_A_Rogers Posted at 2016-12-7 03:51
This and the low batt beeping are both critical updates for me. They are ruining my live streams.

If it's ruining your live streams, don't use RTH and lower the battery warnings and if they're already at the lowest then land before the warning.I made the suggestion but it was not done so this is how it is. They see it as a safety precaution, so it's probably going to stay there.
It's great for the beginner to keep them reminded.

Jan_Leh Posted at 2016-12-6 20:14
Which calibrations should be done after this update? IMU? Sticks? Sensors?

Only when prompted I've checked out my calibration settings all in the green so not going to bother until prompted.

DJI-Ken Posted at 2016-12-6 20:16
If it's ruining your live streams, don't use RTH and lower the battery warnings and if they're already at the lowest then land before the warning.I made the suggestion but it was not done so this is how it is. They see it as a safety precaution, so it's probably going to stay there.
It's great for the beginner to keep them reminded.

Dji ken where's your mavic videos {:4_181:}.

So are you all going to do IMU Cal after this update

Mayoo Posted at 2016-12-6 12:31
So are you all going to do IMU Cal after this update

I'm not planning to unless it asks.

DJI-Ken Posted at 2016-12-6 20:16
If it's ruining your live streams, don't use RTH and lower the battery warnings and if they're already at the lowest then land before the warning.I made the suggestion but it was not done so this is how it is. They see it as a safety precaution, so it's probably going to stay there.
It's great for the beginner to keep them reminded.

Lol Love streams .... giggity giggity!!

I agree with that ken but there should be an option to disable the sound if you want.

Fingers crossed they do in the future. For now ill settle for a more stable mavic

Warrior200 Posted at 2016-12-7 04:21
Dji ken where's your mavic videos .

A few more weeks.

Danny-B- Posted at 2016-12-7 05:11
Lol Love streams .... giggity giggity!!

I agree with that ken but there should be an option to disable the sound if you want.

Sorry, I just saw that.
Fixed and edited.

I'm going to wait a day or two. See if anyone starts complaining about the update

Updated via DJI Go 4 App with no issues as well.

Hi,

in manual update mode, I got the v01.03.0000 Firmware for the magic pro today.
Installation was done in 15 minutes without any problems ...

Has anybody an idea whats new ?

//Oliver

http://forum.dji.com/forum.php?m ... 8172&fromuid=458432

Good details here!

Darin

UPDATE......WELL, Copy / Paste works for crap!!

Posted in another thread but I can't seem to link to it.


New Firmware......12/06/2016

by  hyderja

2016.12.06 v01.03.0000
What's New?
 Added AR route display in TapFly mode when used with the DJI GO 4 app.
 Added a vibration warning for the remote controller when the aircraft enters ATTI mode. 
Added wind speed evaluation and a high wind speed warning.
 Added more film looks and color modes (when used with the DJI GO 4 app).
Improvements:
 Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode.
 Improved magnetic detection for the remote controller. The aircraft will now return to home when
strong magnetic interference is detected.
 Improved the speed at which the HD video link connection can be regained after disruption.
 Optimized altitude maintenance capabilities when flying over water.
 Optimized Gesture Mode.
 Improved the indoor flying experience by shortening the minimum distance from an obstacle from 3m to 1m.
 Optimized power management for long-term battery storage.
https://dl.djicdn.com/downloads/ ... Notes_en_201612.pdf

You are on the latest update.
Here's the release notes.
https://dl.djicdn.com/downloads/ ... Notes_en_201612.pdf

DGHockeytown Posted at 2016-12-7 05:53
http://forum.dji.com/forum.php?m ... 8172&fromuid=458432

Good details here!

Wrong link, here's the correct one.
https://dl.djicdn.com/downloads/ ... Notes_en_201612.pdf

R&L Aerial  Posted at 2016-12-6 13:58
I would wait on this one because of the wind warning has made some peoples phantom 4 pro unusable

Please explain more on this subject please.