Tony_Automated
New
Tanzania
Offline
|
\Hi Guys, Tony Here from Tanzaania. I just run into a problem today,
Please see the image attached. The problem on the gimbal connector wire occurred right after installing the new mavic firmware, after that i changed the battery and replaced with the other battery for an update too.
After finishing updating the other battery, all i saw was fume from the mavic. I immediately removed the battery from the mavic. After a time, i replaced back the battery, and everything was working well except the phone software reports the gimbal isn't working. and as from the photo i suspected that was the issue.
Please see if you have any intel on the issue, why it happened, and if there is any solution available.
https://drive.google.com/open?id ... jFXQVVaZzBaV0FzYlFJ
|
|