Any information on the best way to repair this gimbal issue would be greatly appreciated. I live in New York and as you could imagine during this time of year it's pretty cold, however I had a job where the drone was necessary.. that being said i had a bit of a rough landing and the clip for the gimbal broke off now it's showing me gimbal obstructed. I can clearly see that the mount behind the gimbal I'm just curious as to what the best way to repair it maybe

From what I can tell, that's a Mavic, correct? There really aren't parts out there, unless you want to check with a dealer just in case. You may need to send it in to get addressed.

I ordered a replacement you can buy a 3D printer copy or a metal material much stronger than original.
This is happening a lot called drone nerds you have to buy the complete camera with gimble or do it yourself .
It's held on with two screws on the plate you have four bands you can remove this I'll send you a pic

Did You get the pic

steve1776 Posted at 2017-3-11 09:09
I ordered a replacement you can buy a 3D printer copy or a metal material much stronger than original.
This is happening a lot called drone nerds you have to buy the complete camera with gimble or do it yourself .
It's held on with two screws on the plate you have four bands you can remove this I'll send you a pic

http://IMG_0947.JPG

Broken clip

I have this same problem now to. =\ Anyone know if there has been a fix since this article?