Downloading of firmware for Inspire 1 stops dodwnloaading after about 5 mb.  It show that their is soemthing wrong with DJI's certificate or the streaming certificate.
Any suggestions?

Robert Keith

After many tries, it finally downloaded. I do not know why it kept stopping firmware downloading.

Now, I am having problems of upgrading to my Inspire 1.  I do not know what is going on..................

fansb0b7c1a7 Posted at 2017-1-19 03:07
Now, I am having problems of upgrading to my Inspire 1.  I do not know what is going on..................

Read my  tips page, may help .  May want to try a different PC or Mac to download the file .  Make sure if  you have any other camera besides X3 that you choose it in the Product select on the DJI downloads page as well.
If you have a MAC then format the SD card on the aircraft, it is in the tools section of the camera on the go app, far right center of screen . Then load the file from the MAC, make sure it extracts to a bin file  before loading it to the AC. This is a common problem  with The MAC for some ( I said some, not all ) Users, not sure why .  I own both and find my PC just  loads the FW better and with less problems .


http://forum.dji.com/thread-72851-1-1.html

donnie

I had a similar problem awhile back.  It was resolved by formatting the card in exfat instead of fat32.

fansb0b7c1a7 Posted at 2017-1-19 03:07
Now, I am having problems of upgrading to my Inspire 1.  I do not know what is going on..................

Depending on what browser you're using, the downloading process from the website can be tricky. Can you please elaborate as to what issues you're experiencing while upgrading the firmware?