why does the new update shows 1.9.1.10+ in the app INSTEAD of 1.9.1.30 ?!
2.8.4

Same here. We might have to wait for servers at DJI to update, don't know for sure, though.

same here, Android. Go App Version 2.8.2
Aircraft Version: 1.9.1.10+

updated to 1.9.1.30

It just means that the app is registering a change in firmware. If you leave the device connected to the internet via WiFi or data, the app will eventually reflect the correct firmware version. You can safely fly the unit as is if everything is up to date.

hi DJI-Jamie,

thank you very much.

as otherwise i would get headache again as with 1.9.1.10 switching suddenly to atti and i had all hands praying bringing the inspire "savely" to ground, beside strong wind around 30km/h ..

DJI-Jamie Posted at 2016-7-8 01:26
It just means that the app is registering a change in firmware. If you leave the device connected to ...

mine says  aircraft 1.91.10+

camera 181.00

Why the +  and why some have camera 191.00?

Jack

jackiedh Posted at 2016-7-8 03:48
mine says  aircraft 1.91.10+

camera 181.00

Again, it just means that the app is registering a change in firmware but the app hasn't been connected to the internet long enough to reflect the change. The camera did not receive an update package this time, thus the camera will read as v1.8.1.00.

shk747 Posted at 2016-7-8 01:37
hi DJI-Jamie,

thank you very much.

No problem, it sounds like you're all good to go.

Happy flying!

DJI-Jamie Posted at 2016-7-8 03:57
Again, it just means that the app is registering a change in firmware but the app hasn't been conne ...

Ok Thanks

But some have posted a picture of the about screen showing the camera as 191.00

jackiedh Posted at 2016-7-8 04:05
Ok Thanks

But some have posted a picture of the about screen showing the camera as 191.00

I have not come across that myself, do you have an example of this?

DJI-Jamie Posted at 2016-7-8 04:17
I have not come across that myself, do you have an example of this?

Post #6 and #10 in this thread

http://forum.dji.com/thread-57526-1-1.html

jackiedh Posted at 2016-7-8 05:33
Post #6 and #10 in this thread

http://forum.dji.com/thread-57526-1-1.html

That customer has an Inspire 1 Pro with the X5 camera. That firmware version is correct for his camera. If you have a X3 then the firmware would be 1.8.100.

DJI-Jamie Posted at 2016-7-8 05:57
That customer has an Inspire 1 Pro with the X5 camera. That firmware version is correct for his ca ...

OK Thanks--just wish they would have made that clearer!!

Thanks Again

Jack