Hi Guys,
So we now have our replacement smart controller after the first one we had bricked itself on the startup screen.

Sadly the same issue we had on the previous controller still exists, in that the histogram feature does not work.

We have updated to the latest version of the firmware, but it still does not work.

All that happens is you slide the option bar across in camera settings, which does not enable the histogram on the screen.

Then when you exit the camera options menu, and go back into the menu the option has turned back to off again.

Does anyone have the histogram working on their smart controller?

I’ll double check for you. I’ve got on Smart Controller. I did you the same problem with my Crystalsky. I fixed by not sliding on Histrogram slider, but by poking it on. It’s 10.30 Pm dowunder it check tomorrow.

Forestjim Posted at 3-30 04:28
I’ll double check for you. I’ve got on Smart Controller. I did you the same problem with my Crystalsky. I fixed by not sliding on Histrogram slider, but by poking it on. It’s 10.30 Pm dowunder it check tomorrow.

Thanks that’s great cheers!

FYI we also had the same problem on our Mavic Pro V1 using the crystal sky monitor.

The only work around we found for that was to use the iPad as a controller, then turn on the histogram and then reconnect the CrystalSky monitor and we had the histogram available.

Nigelpugh7 Posted at 3-30 04:35
Thanks that’s great cheers!

FYI we also had the same problem on our Mavic Pro V1 using the crystal sky monitor.

Hey Nigel.

As I thought it's just 'like Andriod and Crystalsky.

I just tested it on my Smart Controller.

Don't slide the slider to the right to engage it, the Histrogram & overexposure warning.

Poke it on !!!!.

I helped a few people out with this in the past.

See below. This is how I was helped. read from post 44 on

https://forum.dji.com/thread-131300-2-1.html

https://forum.dji.com/thread-135655-1-1.html and post 15

Forestjim Posted at 3-31 01:54
Hey Nigel.

As I thought it's just 'like Andriod and Crystalsky.

Hi Jim,

Yep just tried it and it works first time!

Thanks so much!

Nigelpugh7 Posted at 3-31 03:16
Hi Jim,

Yep just tried it and it works first time!

Sweet. So don't be a slider..... But be a poker lol

I have the histogram working normaly